HP RP7 Hardware Reference Guide HP RP7 Retail System Model 7800 - Page 33
mounting bracket 2.
View all HP RP7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
11. Slide the back plate mounting bracket into the mounting hole on the rear of the RP7 base (1), and install the two screws included with the customer display into the screw holes on top of the mounting bracket (2). 12. Replace the power supply cover by lowering it down over the neck of the base then sliding it back until it snaps in place. Installing an Optional HP Retail RP7 10.4" Customer Display 27
11.
Slide the back plate mounting bracket into the mounting hole on the rear of the RP7 base (1),
and install the two screws included with the customer display into the screw holes on top of the
mounting bracket (2).
12.
Replace the power supply cover by lowering it down over the neck of the base then sliding it
back until it snaps in place.
Installing an Optional HP Retail RP7 10.4” Customer Display
27