HP Rp5000 Hardware Reference Guide (2nd Edition) - Page 20
Installing an Expansion Card, Removing the, Computer Access Panel and Front Bezel, Expansion Card Cage - pci slot
UPC - 808736747592
View all HP Rp5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Hardware Upgrades Installing an Expansion Card The computer has two PCI expansion slots. Each slot can accommodate an expansion card up to 6.875 inches (17.46 cm) in length. To install an expansion card: 1. Turn off the computer properly through the operating system, then turn off any external devices. 2. Disconnect the power cord from the power outlet and disconnect any external devices. 3. Remove the computer access panel (see "Removing the Computer Access Panel and Front Bezel" in this chapter). 4. Remove the expansion card cage and identify the slot into which you want to insert the expansion card (see "Removing the Expansion Card Cage" in this chapter). 5. Release the slot cover retention latch 1 that secures the PCI slot covers by rotating the latch outward. 6. Remove the slot cover by sliding it out 2. 2-10 Removing the Expansion Slot Cover www.hp.com Hardware Reference Guide