HP Rp5000 Hardware Reference Guide (2nd Edition) - Page 39
Replace with the appropriate bezel by pushing the bezel into
UPC - 808736747592
View all HP Rp5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Hardware Upgrades 6. Replace with the appropriate bezel by pushing the bezel into place. Ä CAUTION: For proper air circulation to cool internal components during operation, you must install a 3.5-inch bezel. The type of bezel you need will depend on the type of device you are installing. If you are installing a diskette drive, you must install a diskette drive bezel. If you are installing a hard drive, you must install a bezel blank as shown in the illustration below. If you are installing a 3.5-inch device other than a diskette drive or hard drive, you must install the 3.5-inch device bezel. Contact an authorized HP reseller or service provider to order the appropriate bezel when reconfiguring the computer. Replacing the 3.5-inch Bezel 7. Connect the power and data cables. 8. Replace the front bezel and computer access panel. ✎ If you have installed a hard drive that is not automatically recognized by the computer, see Appendix C, "Hard Drive Installation Guidelines." Hardware Reference Guide www.hp.com 2-29