HP Scanjet N8000 Scanjet N8400 User Guide - Page 37
Clear a jam at the end of the paper path, out of the ADF.
View all HP Scanjet N8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Clear a jam at the end of the paper path 1. Remove any loose pages from the ADF input tray. 2. Gently pull the jammed page out of the ADF in the opposite direction from which the page fed into the ADF. 3. If the jammed page still cannot be removed, lift the lid to its fully open position, loosen the jammed page from the roller on the underside of the lid, and then gently pull the page out of the ADF. 4. Close the ADF hatch. Press down firmly on both sides until you hear a click. 5. Re-stack the unscanned pages and reload them into the ADF. 6. Resume scanning. Automatic document feeder (ADF) problems 35
Clear a jam at the end of the paper path
1.
Remove any loose pages from the ADF input tray.
2.
Gently pull the jammed page out of the ADF in the opposite direction from which the
page fed into the ADF.
3.
If the jammed page still cannot be removed, lift the lid to its fully open position, loosen
the jammed page from the roller on the underside of the lid, and then gently pull the
page out of the ADF.
4.
Close the ADF hatch. Press down firmly on both sides until you hear a click.
5.
Re-stack the unscanned pages and reload them into the ADF.
6.
Resume scanning.
Automatic document feeder (ADF) problems
35