HP Scitex FB6100 Scitex Guide - Page 49

HP Scitex FB6700 Printer Media List Overview Listed below media was tested on HP Scitex FB6700 machine and printed with WB300 ink in 2 and 4 pass print modes. color management: Printed file is limited up to 320% ink coverage. Dryer type: Extended + IR. List contains recommended dryer setup and expected media shrinkage. Listed below media passed the following tests with limitations noted in the list: • Machine handling • Application and quality • Cross cut test (if applicable) • Tape adhesion • Scratch resistance • Wet abrasion • Folding (if applicable) All tests were provided accordingly to ASTM or internal HP standards. The information contained herein is subject to change without notice. HP shall not be liable for media manufacturing process inconsistency. The only warranties for HP products and services are set forth in the express warranty statements accompanying such product and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. HP Scitex FB6700 Printer Media list Type Thickness Street and brand names Recommended drying parameters and shrinkage Limitations and Recommendations Main manufacturer and product names Belt speed Temperature º C IR1/IR2 Expected shrinkage (mm) Corrugated carton Compressed carton Foam board with paper liner Re-b- oard Foamed PVC Polycarbonate Acrylic Polystyrene 1.7--7mm 1.2--5mm 5- 16mm Carton, fluted carton Display board, card board, SBS Kapa, Gator 8- 16mm 3mm 5- 10mm 2- 5mm Palight Simona Forex, Sintra, Palight, Simona Lexan 2- 5mm Plexiglass, Perspex, Acrylglass 1- 5mm Styrene, HIPS 1.3 70 off 1.8 77 off 1.3 92 off 1.8 98 off 1.3 84 30/30 1.8 86 30/30 1.3 75 35/30 1.8 82 35/30 0.9 72 35/30 0.9 74 35/30 0.9 74 35/30 1.2 91 off 1.2 100 off 1.2 90 off 1.8 98 35/30 Paper top 5* Board curvature should be less 4 than 5% 4 4 3 3 Glued with w/b glue only 3 3 Plastic top 5 7 5 3 Limited wetting properties. Possible ink clustering on areas with more than 100% ink coverage. Not suitable for backlit 5 applications. Low ink wet abrasion properties. 3 Especially on areas lower than 80% ink coverage. For outdoor applications, coating or 3 laminating recommended SCA, M-real Kemi Graph Willamette, Brown Kraft Liner Smurfit Stone, White Top Korsnas WT-140, Décor Reno De Medici, GD 807 Eskagraphic, EskaScreen Alcan, KapaLine, Foam-X, Gator, Fome-Cor HuntCorp, Beinfang Palram, Palight Simona, Simona Alcan, Forex, Sintra Palram, Palsun Palram, Palglass Plazit, Styrene Fluted polypropylene Foam board with plastic liner 1.3 86 40/35 8 Low ink adhesion properties. For Coroplast, Polygal, outdoor applications, coating or 3- 10mm Corrugated PP 1.8 95 40/35 8 laminating recommended 5- 10mm KapaP last 1.3 85 30/30 3 1.8 92 35/35 3 Glued with w/b glue only * Shrinkage is indicated for tested media types and board dimensions only (Width X Length X Thickness, mm) Corrugated carton B flute 1600X3200| Compressed carton 1600X2300X3| Foam board 1220X2440X5| Re-Board 1600X2300X16| Foamed PVC Simona 1530X3050X3| Foamed PVC Palight1225X2450X3| Polycarbonate 1530X2055X2| Acrylic 1530X2055X2| Polystyrene 1025X1500X2| Fluted PP 1600X2000X4| Polygal, Polygal Alcan, KapaPlast Link, address www.scapackaging.com Willamette Industries, Inc. P.O. Box 471315 Tulsa, OK 74147, +1918-664-4225 www.korsnas.com www.renodemedici.it www.eskagraphicboard.com www.alcancomposites.com www.forframersonly.com www.palram.com www.simona.de www.alcancomposites.com www.palram.com www.palram.com www.plazit.com www.polygal.com www.alcancomposites.com 49