HP Scitex FB7500 Essential Health and Safety Instructions Rev.C - Page 12
Safe Operation Guidelines
View all HP Scitex FB7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Safe Operation Guidelines The printer is designed and manufactured to ensure maximum safety operation. It should be installed, operated, and maintained by qualified users (authorized by HP Scitex) in strict compliance with the safety precautions, warnings, and operating instructions provided by HP Scitex. General • The HP Scitex FB7600 has been designed to meet the safety requirements applicable to printing equipment. However, anyone attempting to operate the system must be fully aware of potential safety hazards. See Personal Safety - Working with the Printer on page 25. • HP Scitex is not responsible for any injury or damage to the machine caused by use of the machine other than its intended use as described in the manuals supplied by HP Scitex. • The product should be installed, maintained, and serviced by qualified field service engineers (authorized by HP Scitex), in accordance with the information, procedures, and instructions provided by HP Scitex. • The system in whole, or in part, should not be modified in any way without obtaining the prior written approval of HP Scitex. • The owner should make certain that only properly trained, fully qualified personnel are authorized to operate and maintain the FB7600. An authorized operators list should be maintained. Unauthorized personnel should not be allowed access to the system. • It is important that this, and all other HP Scitex FB7600 guides, should be kept close at hand, studied carefully, and reviewed periodically by the authorized technicians. However, the manufacturer or vendor of the equipment makes no representation that the act of reading this guide - or any other HP Scitex FB7600 guide - renders the reader qualified to operate, test, or calibrate the system. • Authorized operators should wear buttoned-up shirt sleeves and closed shoes when operating the FB7600 printer. • The HP Scitex FB7600 must have a dedicated power supply, which must not - under any circumstances - be used for additional equipment. • Pipes and cables that connect the external components (such as the UV cabinet and the PDU) to the machine must be protected with a secure, metal cover of 170 mm height. • Before performing any maintenance procedure, shut down the system and padlock the main power switch on the electrical cabinet in the OFF position. 4 HP Scitex Industrial Presses Essential Health and Safety Instructions