HP Scitex LX600 HP Scitex LX Printer Family - User's guide - Page 37
Loading the dual-roll spindles, spring, tighten the screw further.
![]() |
View all HP Scitex LX600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Loading the dual-roll spindles 1. Ensure that the differential hubs on the input and output spindles are aligned with each other. 2. When both differential hubs are correctly positioned, use an Allen key 6 to tighten the screws and secure them in place. If a differential hub is loose, the substrate could become skewed during printing. TIP: You should tighten the screw until the washer touches the bolt. If you can still see the yellow spring, tighten the screw further. TIP: It will be easier to load the roll onto the spindle if you lock the differential. 3. At each end of the spindle, unscrew and remove the outer parts of the hub, using an Allen key 4. ENWW Load a roll onto the spindle 33
![](/manual_guide/products/hewlettpackard-scitex-lx600-hp-scitex-lx-printer-family-users-guide-8d1a543/37.png)
Loading the dual-roll spindles
1.
Ensure that the differential hubs on the input and output spindles are aligned with each other.
2.
When both differential hubs are correctly positioned, use an Allen key 6 to tighten the screws and
secure them in place. If a differential hub is loose, the substrate could become skewed during
printing.
TIP:
You should tighten the screw until the washer touches the bolt. If you can still see the yellow
spring, tighten the screw further.
TIP:
It will be easier to load the roll onto the spindle if you lock the differential.
3.
At each end of the spindle, unscrew and remove the outer parts of the hub, using an Allen key 4.
ENWW
Load a roll onto the spindle
33