HP Server tc2120 HP Server Ultra 3 SCSI Host Bus Adapter Installation and Conf - Page 38
Installing the Driver When Windows 2000 is Already Installed
View all HP Server tc2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Chapter 4 Microsoft Windows 2000 Installation Installing the Driver When Windows 2000 is Already Installed To update or install the driver if Windows 2000 is already installed, follow these instructions: 1. Start Windows 2000. 2. Click the Start button on the Windows 2000 task bar, and then point to Settings. 3. Click the Control Panel. 4. Double-click the System icon. 5. Select the Hardware tab and click the Device Manager button. 6. Under SCSI and RAID Controllers, click on the + sign to the left. This will display the SCSI adapters currently installed. Right-click on the device you wish to update and select Properties. 7. Click the Driver tab and click the Update Driver button. The Update Device Driver Wizard will start. Click Next. 8. Select the "Search for a suitable driver" option and click Next. 9. Select the location where the updated driver is installed and click Next. 10. At this step, Windows 2000 will recommend one of two choices. If it recommends using the driver found on the driver disk, then click Next and skip to Step 12. It might recommend that you keep the existing driver and mention that it found other suitable drivers. If this is the case, select "Install one of the other drivers" and click Next. 11. You may be asked to enter the path for the driver. \win2000\ultra160\adpu160m.sys 12. Click Finish. You may be required to reboot your system. 32