HP Server tc2120 HP Server Ultra 3 SCSI Host Bus Adapter Installation and Conf - Page 58
Troubleshooting, Error Messages, x080] Unable to allocate memory
View all HP Server tc2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Chapter 5 Novell NetWare Installation Troubleshooting Error Messages The error messages listed below are the messages associated with the adpt160m.ham driver. Messages are listed sequentially according to the last three digits of the error code. For example, [xxxxx080], [xxxxx081], [xxxxx082], etc. NOTE When reporting problems to HP Customer Support, be sure to include the complete error code in your problem description. [xxxxx080] Unable to allocate memory This indicates that there may be a problem with the amount of memory installed in your system. Verify that your system has at least the minimum amount of memory required by your operating system. [xxxxx081] Adapter software initialization failure An error has occurred while the driver was setting up its internal data structures. Verify that your adapter is supported by this version of the driver. [xxxxx082] Internal driver error An error has occurred while the driver was setting up its internal data structures. Try installing the most up-to-date version of the driver available from the HP Web site located at: http://www.hp.com [xxxxx083] Adapter not supported by this version of the driver Your adapter is not supported by the driver on your system. You may have installed a new adapter and have not updated the driver on your system. [xxxxx084] Adapter software initialization failure An error has occurred while the driver was setting up its internal data structures. Try installing the most up-to-date version of the driver available from the HP Web site located at: http://www.hp.com 52