HP SlateBook 14-p001xx HP SlateBook PC Maintenance and Service Guide - Page 32

Rear speakers

Get HP SlateBook 14-p001xx PDF manuals and user guides View all HP SlateBook 14-p001xx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Rear speakers Component Rear speakers (include left and right rear speakers and cables) Spare part number 763353-001 Before replacing the rear speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 17). Remove the rear speakers: 1. Disconnect the rear speaker cable (1) from the system board. 2. Release the rear speaker cable from the retention clip (2) built into the base enclosure. 3. Remove the two Phillips PM1.9×2.8 screws (3) that secure the rear speakers to the base enclosure. 4. Remove the rear speakers (4) and cables. Reverse this procedure to install the rear speakers. 26 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
Rear speakers
Component
Spare part number
Rear speakers (include left and right rear speakers and cables)
763353-001
Before replacing the rear speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
17
).
Remove the rear speakers:
1.
Disconnect the rear speaker cable
(1)
from the system board.
2.
Release the rear speaker cable from the retention clip
(2)
built into the base enclosure.
3.
Remove the two Phillips PM1.9×2.8 screws
(3)
that secure the rear speakers to the
base enclosure.
4.
Remove the rear speakers
(4)
and cables.
Reverse this procedure to install the rear speakers.
26
Chapter 4
Removal and replacement procedures