HP Spectre 13-4000 Spectre x360 Convertible PC model numbers 13-4000 through 4 - Page 41
Fan, Shut down the computer. If you are unsure whether the computer is off or in Hibernation
View all HP Spectre 13-4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
2. Remove the solid-state drive (2) by pulling the drive away from the slot at an angle. Reverse this procedure to install the solid-state drive. Fan NOTE: The fan spare part kit includes the fan cable. Description Spare part number For use only on computer models equipped with an Intel Core i-7 6550U, Intel Core i-7 6500U, or Intel Core i-5 6200U processor 828818-001 For use only on computer models equipped with an Intel Core i-7 5600U, Intel Core i-7 5500U, Intel Core 801493-001 i-5 5300U, or Intel Core i-5 5200U processor NOTE: To properly ventilate the computer, allow at least 7.6 cm (3 in) of clearance on the left side of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are affected by high external temperatures, system power consumption, power management/battery conservation configurations, battery fast charging, and software requirements. Exhaust air is displaced through the ventilation grill located on the left side of the computer. Before removing the fan, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Disconnect the battery cable from the system board (see Battery on page 29). Remove the fan: Fan 33