HP Spectre 13-4200 Spectre x360 Convertible PC model numbers 13-4000 through 4 - Page 57
Power connector cable, Reverse this procedure to install the audio jack board.
View all HP Spectre 13-4200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Reverse this procedure to install the audio jack board. Power connector cable Description Power connector cable Spare part number 801513-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 28), and then remove the following components: a. Remove the battery (see Battery on page 29). b. Remove the fan (see Fan on page 33). c. Remove the system board (see System board on page 38). d. Remove the display assembly (see Display assembly on page 46). Remove the power connector cable: 1. Release the power connector cable (1) from the retention clips built into the bottom cover. 2. Remove the Phillips PM2.0×4.1 screw (2) that secures the power connector to the top cover. 3. Remove the power connector cable (3). Reverse this procedure to install the power connector cable. Power connector cable 49