HP Spectre XT TouchSmart Ultrabook 15-4001xx HP SpectreXT TouchSmart Maintenan - Page 49
Power button board, Remove the Phillips PM2.0×4.5 screw
View all HP Spectre XT TouchSmart Ultrabook 15-4001xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Power button board Description Power button board (includes cable) Spare part number 700891-001 Before removing the power button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 33). 5. Disconnect the battery cable from the system board (see Battery on page 35). Remove the power button board: 1. Release the zero insertion force (ZIF) connector (1) to which the power button board cable is attached, and then disconnect the power button board cable from the system board. 2. Detach the power button board cable (2) from the memory shield. (The power button board cable is attached to the memory shield with double-sided tape at 2 locations.) 3. Remove the Phillips PM2.0×4.5 screw (3) that secures the power button board to the top cover. Component replacement procedures 41