HP Spectre XT TouchSmart Ultrabook 15-4001xx HP SpectreXT TouchSmart Maintenan - Page 64
TouchPad LED board, Release the TouchPad LED board
View all HP Spectre XT TouchSmart Ultrabook 15-4001xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
TouchPad LED board Description TouchPad LED board (includes cable) Spare part number 700012-001 Before removing the TouchPad LED board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 33). 5. Remove the battery (see Battery on page 35). Remove the TouchPad LED board: 1. Release the ZIF connector (1) to which the TouchPad LED board cable is attached, and then disconnect the TouchPad LED board cable from the system board. 2. Detach the TouchPad LED board cable (2) from the top cover. (The TouchPad LED board cable is attached to the top cover with double-sided tape.) 3. Release the TouchPad LED board (3) from the clips (4) built into the top cover. 4. Remove the TouchPad LED board and cable (5), making sure to route the cable underneath the TouchPad cable. Reverse this procedure to install the TouchPad LED board and cable. 56 Chapter 4 Removal and replacement procedures