HP Split 13-f010dx HP Split 13 x2 PC Maintenance and Service Guide - Page 69
Speakers
View all HP Split 13-f010dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
3. Remove the card reader board (3) by sliding it forward, making sure to carefully route the card reader board cable through the opening (4) in the display assembly. Reverse this procedure to install the card reader board. Speakers Description Speaker Kit (includes left and right speakers and cables) Spare part number 736899-001 Before removing the speakers, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 38), and then remove the following components: a. Tablet battery (see Tablet battery on page 40) b. Audio/power connector board (see Audio/power connector board on page 55) Removal and replacement procedures 61