HP Split 13-f010dx HP Split 13 x2 PC Maintenance and Service Guide - Page 85
Remove the four Phillips PM2.75×4.0 screws, hard drive.
View all HP Split 13-f010dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
3. Remove the hard drive (3). 4. If it is necessary to disassemble the hard drive, perform the following steps: a. Disconnect the hard drive connector cable (1) from the hard drive. b. Remove the four Phillips PM2.75×4.0 screws (2) that secure the hard drive bracket to the hard drive. Removal and replacement procedures 77
3.
Remove the hard drive
(3)
.
4.
If it is necessary to disassemble the hard drive, perform the following steps:
a.
Disconnect the hard drive connector cable
(1)
from the hard drive.
b.
Remove the four Phillips PM2.75×4.0 screws
(2)
that secure the hard drive bracket to the
hard drive.
Removal and replacement procedures
77