HP StorageWorks 2/128 Brocade Fabric OS Command Reference Manual - Supporting - Page 190
fabricPrincipal, Synopsis, Description, Operands, Examples, See Also, fabricShow
View all HP StorageWorks 2/128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
2 fabricPrincipal fabricPrincipal Sets principal switch selection mode. Synopsis fabricprincipal [-fhq][mode] Description Use this command to set principal switch selection mode for the switch. The implementation of the fabricPrincipal command is based solely on mechanisms specified in the Fibre Channel standards. These mechanisms provide a preference for a switch requesting to be the principal switch in a fabric, but they do not provide an absolute guarantee that a switch requesting to be the principal switch will actually achieve this status. When dealing with larger fabrics, the selection of the principal switch is less deterministic. In these cases, to help ensure that the desired switch is selected as the principal switch, a small selection of switches should be connected together first, followed by the addition of the rest of the fabric. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operands: -f Specify the -f option to force a fabric rebuild. This option is required when enabling principal switch mode. This option is not valid with the disabling principal switch mode. -h Specify the -h option to display command usage summary. -q Specify the -q option to display the current mode state. mode Specify 1 to enable, or 0 to disable principal switch mode (the mode activates when the fabric rebuilds). This operand is optional. Examples To display the current mode setting: switch:admin> fabricprincipal -q Principal Selection Mode: Enable To disable the mode setting: switch:admin> fabricprincipal 0 Principal Selection Mode disabled To enable the mode setting: switch:admin> fabricprincipal 1 Principal Selection Mode enabled See Also To enable the mode setting and force fabric rebuild: switch:admin> fabricprincipal -f 1 Principal Selection Mode enabled (Forcing fabric rebuild) fabricShow 158 Fabric OS Command Reference Manual 53-1000436-01