HP StorageWorks 2/128 Brocade Fabric OS Command Reference Manual - Supporting - Page 338
Sets the Ethernet IP address, Ethernet subnetmask, Fibre Channel IP, Selects
View all HP StorageWorks 2/128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 338 highlights
2 ipAddrSet -IPv6 --add --delete -eth0 -eth1 -gate -slot n 0 Sets the Ethernet IP address, Ethernet subnetmask, Fibre Channel IP address, and Fibre Channel subnetmask of logical switch 0. 1 Sets the Ethernet IP address, Ethernet subnetmask, Fibre Channel IP address, and Fibre Channel Subnetmask of logical switch 1. Sets or deletes IPv6 addresses. Specifies an address to set with a prefix, if needed. Deletes the address. Selects the address on the blade to alter. Selects the slot to apply the command to on a chassis-based system. Examples To configure an IPv6 address on a switch or CP: switch:admin> ipaddrset -ipv6 -cp 0--add 1080::8:800:200C:417A/64 IP address is being changed...Done. See Also To set the IP address details for switch number 1 on a chassis-based system: switch:admin> ipaddrset -sw 1 Ethernet IP Address [192.168.166.148]: Ethernet Subnetmask [255.255.255.0]: Fibre Channel IP Address [none]: Fibre Channel Subnetmask [none]: Committing configuration...Done. OK. To enable DHCP on a non-chassis-based system: switch:admin> ipaddrset Ethernet IP Address [192.168.74.102]: Ethernet Subnetmask [255.255.255.0]: Fibre Channel IP Address [220.220.220.2]: Fibre Channel Subnetmask [255.255.0.0]: Gateway IP Address [192.168.74.1]: DHCP [Off]: on ipAddrShow 306 Fabric OS Command Reference Manual 53-1000436-01