HP StorageWorks 2000fc HP StorageWorks P2000 G3 MSA System Event Description R - Page 32

355 Warning The faceplate's debug button was found to be stuck in the On position during boot up. Recommended actions • If the button remains stuck, replace the controller module. 358 Critical All PHYs are down for the indicated disk channel. The system is degraded and is not fault-tolerant because all disks are in a single-ported state. Recommended actions • Power-cycle the controller enclosure. • If the condition doesn't persist, no further action is required. • If the condition persists, this indicates a hardware problem in one of the controller modules or in the controller enclosure midplane. Contact technical support for help identifying which FRU to replace. Warning Some, but not all, PHYs are down for the indicated disk channel. Recommended actions • Monitor the log to see whether the condition persists. • If the condition doesn't persist, no further action is required. • If the condition persists, this indicates a hardware problem in one of the controller modules or in the controller enclosure midplane. Contact technical support for help identifying which FRU to replace. 359 Informational All PHYs that were down for the indicated disk channel have recovered and are now up. Recommended actions • No action required. 360 Informational The speed of the indicated disk PHY has changed. 412 Warning One disk in the indicated RAID-6 vdisk failed. The vdisk is operational with Degraded health and status FTDN (fault tolerant with a down disk). Recommended actions • Replace the down disk with a spare so the system can start reconstructing the vdisk. 413 Informational Created a replication set with the indicated external-view volume. Recommended actions • No action required. 414 Error Failed to create the indicated replication set for the indicated volume. Recommended actions • No action required. 415 Informational Deleted the indicated replication set. Recommended actions • No action required. 32