HP StorageWorks 4/256 Brocade Fabric OS Command Reference Guide v6.1.0 (53-100 - Page 58
aliAdd, quotation marks. Members must be separated by semicolons. An alias
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
2 aliAdd aliAdd Adds a member to a zone alias. Synopsis aliadd "aliName", "member[; member...]" Description Use this command to add one or more members to an existing zone alias. The alias member list cannot contain another zone alias. This command changes the defined configuration. For the change to become effective, enable the zone configuration with the cfgEnable command. For the change to be preserved across switch reboots, save the zone configuration to nonvolatile memory with cfgSave. Note When FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operands are required: "aliName" Specify the name of a zone alias, enclosed in quotation marks. "member" Specify a member or list of members to be added to the alias, enclosed in quotation marks. Members must be separated by semicolons. An alias member can be specified by one or more of the following methods: • A switch domain and port area or index number pair. Use switchShow for a list of valid port area or index numbers. • WWN Examples To add members to zone aliases array1, array2, and loop1: switch:admin> aliadd "array1", "1,2" switch:admin> aliadd "array2", "21:00:00:20:37:0c:72:51" switch:admin> aliadd "loop1", "4,5[0x02]; 6,7[0xEF]" See Also aliDelete, aliRemove, aliShow 32 Fabric OS Command Reference 53-1000599-02