HP StorageWorks 4/256 Brocade Web Tools Administrator's Guide v6.3.0 (53-10013 - Page 170
ATTENTION, Web Tools buffer.
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
9 Zoning management You must be logged into the switch using a user name with one of the following roles associated with it to make changes to the zoning: zoneAdmin, admin, or fabricAdmin. All other roles allow only a view or read-only access. Most of the zoning operations are disabled in read-only mode. A snapshot is taken of all the zoning configurations at the time you launch the Zone Administration window; this information is not updated automatically by Web Tools. To update this information, refer to "Refreshing Zone Administration window information" on page 140. When you log in to a virtual switch, or select a virtual switch using the drop down list under Fabric Tree section in the Switch Explorer window, only the ports that are associated with the Virtual Fabric ID you selected are displayed in the member selection list. You can use the Add Other button to add ports of other switches in the fabric. FIGURE 73 Zone Administration window ATTENTION Any changes you make in the Zone Administration window are held in a buffered environment and are not updated in the zoning database until you save the changes. If you close the Zone Administration window without saving your changes, your changes are lost. To save the buffered changes you make in the Zone Administration window to the zoning database on the switch, refer to "Saving local zoning changes" on page 140. Note the following: • "Saving" means updating the zoning database on the switch with the local changes from the Web Tools buffer. 138 Web Tools Administrator's Guide 53-1001343-01