HP StorageWorks 4/256 Brocade Web Tools Administrator's Guide v6.3.0 (53-10013 - Page 240
Launching the iSCSI setup wizard, Activating the iSCSI feature
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
15 Setting up iSCSI Target Gateway Services Launching the iSCSI setup wizard Use the following procedure to launch the iSCSI setup wizard. 1. Select a switch from the Fabric Tree and log in, if necessary. The selected switch displays in Switch View. Make sure that your Admin Domain Context is either AD0 or AD255. Generally, the default user Admin Domain is AD0. The recommended practice is to perform all iSCSI management from AD0; you can make changes from AD255 but you will not be able to make any zoning changes. 2. Click iSCSI in the Manage section of the Tasks menu. The iSCSI Administration window opens. 3. Click Launch Usability Wizard. Follow the steps in the wizard to complete all the setup tasks. Activating the iSCSI feature By default, a director has iSCSI disabled. If a switch has iSCSI disabled or there is no iSCSI virtual target created, Web Tools assumes that iSCSI is not activated. 1. Ensure that the blade is inserted in the director and powered on. 2. Open iSCSI Target Gateway Admin as described on page 206. 3. Click Enable iSCSI. 4. Click Apply. Encryption Services for the iSCSI Gateway Data-At-Rest encryption services for the iSCSI hosts is supported for the Encryption Switch and the FS8-18 Encryption blade in the case where they are in the same fabric as the FC4-16IP and FA4-18 and the AP7600 platforms. When the FS8-18 Encryption blade and the FC4-16IP blade are in the same fabric, the Virtual Initiator (VI) exposed by the FC4-16IP blade can be exposed as physical hosts to the FS8-18 encryption blade to provide encryption services. Similarly, the Virtual Target exposed by the FS8-18 encryption blade can be exposed as a Physical Target to the FS8-18 Encryption blade. 208 Web Tools Administrator's Guide 53-1001343-01