HP StorageWorks 64 FW 07.00.00/HAFM SW 08.06.00 McDATA Products in a SAN Envir - Page 294
Power Requirements, Clearances, Cabinet Footprint, Input voltage, Input current, Input frequency
View all HP StorageWorks 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 294 highlights
Product Specifications Power Requirements The Fabricenter cabinet has the following power requirements: Input voltage: 200 to 240 VAC. Input current: 30.0 amps at 208 VAC. Input frequency: 47 to 63 Hz. Clearances The Fabricenter cabinet has the following cooling airflow and service clearances. Cooling airflow clearances: Right and left side: No clearance required. Front and rear: 15.2 centimeters (6.0 inches). Service clearances: Right and left side: No clearance required. Front and rear: 91.4 centimeters (36.0 inches). Cabinet Footprint Figure A-1 illustrates the Fabricenter cabinet footprint. The bottom denotes the front of the cabinet. The illustration includes: 1. Cabinet-leveling screws (eight total). 2. Cooling airflow cutouts (eight total). 3. Fibre Channel cable cutouts (two total). 4. Caster wheel attachments (four total). 5. Power cable cutout (one). A-8 McDATA Products in a SAN Environment - Planning Manual