HP StorageWorks 64 FW 07.00.00/HAFM SW 08.06.00 McDATA Products in a SAN Envir - Page 306
Failed, ADMIN, Feature, E/OS 7.0, E/OSi 4.6, BB_Credit value of 16. Intelligent
View all HP StorageWorks 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 306 highlights
Firmware Summary Table B-6 E/OS versus E/OSn and E/OSi - Management-Related Differences (Continued) Feature Diagnostics (port failure state) E/OS 7.0 Port set to Failed state upon failing a user- invoked port diagnostic test. E/OSn 6.0 E/OSi 4.6 If external port diagnostics are performed without a loopback plug the diagnostic test fails, but port is not set to Failed. If external port diagnostics or management port diagnostics are performed without a loopback plug, the diagnostic test fails, but port is not set to Failed. Buffer-to-buffer credit (BB_Credit) support BB_Credit subject to a per-port maximum value and a product-wide (pool) maximum value. Refer to Distance Extension Through BB_Credit for information. Audit log entries related Flexpar feature not supported. to flexible partitioning BB_Credit subject to a per-port maximum value and a paddle-pair wide (pool) maximum value. BB_Credit also subject to remote fabric PFE being enabled or disabled. Refer to Distance Extension Through BB_Credit for information. Fibre Channel ports set to a BB_Credit value of 16. Intelligent ports support IP network connectivity and not assigned BB_Credits. Ports provide 96 MB of TCP packet buffering per transmission direction. When a user downloads firmware, performs a CTP card switchover, configures partitioning, or clears the system error light (or performs an operation with system-wide impact), the corresponding Audit log entry is recorded only for the ADMIN partition (0). Log entries are processed differently for the ADMIN partition (0) versus other partitions (1 through 3). Flexpar feature not supported. Other log entries related to flexible partitioning Audit log entries (EFCM) Flexpar feature not supported. Log entries (non Audit log) are processed differently for the ADMIN partition (0) versus other partitions (1 through 3). Flexpar feature not supported. Log contains EFCM user name and IP address of EFCM client. Log contains only the IP address of the EFCM server. Log does not contain EFCM user name and IP address of EFCM client. Remote workstations (clients) not supported through the SANvergence Manager application. The application supports an APP log that is functionally equivalent to the EFCM Audit log. In addition, the Element Manager application has an Audit log independent of SANvergence Manager. B-10 McDATA Products in a SAN Environment - Planning Manual