HP StorageWorks 64 FW 07.00.00/HAFM SW 08.06.00 McDATA Products in a SAN Envir - Page 302

Firmware Summary Table B-6 E/OS versus E/OSn and E/OSi - Management-Related Differences (Continued) Feature E/OS 7.0 E/OSn 6.0 General SNMP support SNMP interface supports Version 1, Version 2c, and a configuration-related subset of product features. SNMP interface supports Version 1, Version 2c, and Version 3. Read-only use recommended with Versions 1 and 2c. Read-write use recommended with secure Version 3. Fibre Alliance management information base (MIB) support Supports Fibre Channel Management Framework Integration MIB (FC-MGMT-MIB) Versions 3.0 and 3.1. MIB version user defined. Supports FC-MGMT-MIB Version 4.0. MIB version not user defined. E/OSi 4.6 SNMP interface supports Version 1 and a configuration-related subset of product features. Supports FC-MGMT-MIB Version 3.0. MIB version not user defined. SNMP traps Subset of event notifications sent as SNMP traps. All transmissions use proprietary not most recently used (NMRU) protocol. All significant events asynchronously distributed as SNMP traps. Subset of event notifications asynchronously distributed as SNMP traps. Throughput threshold alert (TTA) support Port TTAs supported through the EFCM and CLI interfaces. Switch performance threshold alerts (SPTAs) not supported. Port TTAs supported through the Intrepid 10000 Director CLI and EFCM interfaces. Paddle-pair SPTAs only supported through the director CLI interface. Port TTAs and SPTAs not supported. Counter threshold alert Port counter CTAs supported Port counter CTAs not (CTA) support through the CLI interface only. supported. Port counter CTAs not supported. Product feature enablement (PFE) key support PFE keys supported: Element Manager, OpenTrunking, SANtegrity binding and authentication, OSMS, FMS, FlexPorts, FICON CUP zoning, full volatility, full fabric, and CNT WAN support. PFE keys supported: Element Manager, SANtegrity binding, FMS, remote fabric, and FlexPars (last two are Intrepid 10000 Director features). Full volatility is supported but does not require a PFE key. PFE keys are not supported through the SANvergence Manager or Element Manager applications. Port address FE and FF prohibit dynamic connectivity mask (PDCM) array entries Port addresses FE and FF are implemented internally and only when FMS is PFE-key enabled. Port addresses FE and FF do not exist in the PDCM array and cannot be used. FICON devices cannot attach to physical ports associated with these addresses. When FMS is enabled, the ports become spare (transmit only an OLS) but can be port swapped. FICON management style (with associated PDCM array) not supported. B-6 McDATA Products in a SAN Environment - Planning Manual