HP StorageWorks 64 HAFM SW 08.08.00 HP StorageWorks HA-Fabric Manager Transiti - Page 23
Enabling a feature key
![]() |
View all HP StorageWorks 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
• You reset the default settings through the Element Manager's Reset Configuration option. • You re-enter a feature key created before firmware 6.0 release and the Element Manager key is deleted. • Enabling the Reset Configuration option through the Element Manager Maintenance menu clears all features that were enabled through the Configure Feature Key dialog box. When you attempt to re-install features using a feature key assigned for version firmware 5.x, a warning instructs you that the Element Manager feature key is not installed. You must contact customer support to get a feature key reassigned. • As a new addition for HAFM 8.x, access to the Element Manager is provided through a feature key. If you do not have a feature key for an Element Manager, messages may display indicating this. Also, if you try to access a feature without Element Manager support, a message may display explaining that Element Manager support has not been installed. In these cases, you must contact your sales representative to obtain a feature key. NOTE: Switches and directors on existing HP fabrics, whether running a firmware version earlier than 6.0 or upgraded to firmware 6.0, do not require Element Manager feature keys. • For directors and switches shipped with firmware 6.0 or later installed: • Directors-The Element Manager enablement certificate is included with the unit as shipped. • Switches-The Element Manager is optional. When you want to manage a switch through an Element Manager, you can receive an enablement certificate with which you can obtain a feature key. You must activate this key through the Configure Feature Key dialog box. • As you purchase additional Element Manager features, you receive a an enablement certificate with which you can obtain a feature key. Enabling a feature key To enable a feature key in the switch or director Element Manager: 1. Click Configure > Features. The Configure Feature Key dialog box is displayed. 2. Click New to add a new feature key. The New Feature Key dialog box is displayed. 3. Enter the switch or director feature key and click OK. HA-Fabric Manager transition guide 23
![](/manual_guide/products/hewlettpackard-316095b21-hafm-sw-080800-hp-storageworks-hafabric-manager-transition-guide-aarv1mdte-2006-33699ca/23.png)