HP StorageWorks 8/40 Brocade Converged Enhanced Ethernet Administrator's Guide - Page 136
Defining a priority-table map, Define the map.
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
9 Converged Enhanced Ethernet map configuration switch(config)#cee-map test switch(config-ceemap)#priority-group-table 0 weight 50 pfc switch(config-ceemap)#priority-group-table 1 weight 50 switch(config-ceemap)#exit switch(config)#end 5. Enter the copy command to save the running-config file to the startup-config file. switch#copy running-config startup-config Defining a priority-table map Perform the following steps from Privileged EXEC mode define a priority-table map. 1. Enter global configuration mode. switch#configure terminal 2. Specify the name of the CEE map to define. In this example 'test' is used. switch(config)#cee-map test 3. Define the map. switch(config-ceemap)#priority-table 1 1 0 0 1 1 1 15.0 Example of defining a CEE map with a Priority-to-Priority Group Table Priority PGID 0 1 1 1 2 0 3 0 4 1 5 1 6 1 7 15 switch:admin>cmsh switch>enable switch#configure terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)#cee-map test switch(config-ceemap)#priority-table 1 1 0 0 1 1 1 15.0 switch(config-ceemap)#exit switch(config)#end 4. Enter the copy command to save the running-config file to the startup-config file. switch#copy running-config startup-config 116 Converged Enhanced Ethernet Administrator's Guide 53-1001346-01