HP StorageWorks 8/40 Brocade Converged Enhanced Ethernet Administrator's Guide - Page 28
Layer 2 Ethernet overview, Layer 2 forwarding
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
1 Layer 2 Ethernet overview Layer 2 Ethernet overview The Brocade FCoE hardware contain CEE ports that support FCoE forwarding. The CEE ports are also backwards compatible and support classic Layer 2 Ethernet networks (see Figure 5). In Layer 2 Ethernet operation, a host with a Converged Network Adapter (CNA) can be directly attached to a CEE port on the Brocade FCoE hardware. Another host with a classic 10-Gigabit Ethernet NIC can be either directly attached to a CEE port, or attached to a classic Layer 2 Ethernet network which is attached to the Brocade FCoE hardware. FIGURE 5 Multiple switch fabric configuration Classic Layer 2 Ethernet switch Host 3 Host 1 Brocade 8000 switch CNA or classic NIC FC switch Classic NIC Host 2 CNA or classic NIC FC switch Storage Layer 2 forwarding Layer 2 Ethernet frames are forwarded on the CEE ports. 802.1Q VLAN support is used to tag incoming frames to specific VLANs, and 802.3ac VLAN tagging support is used to accept VLAN tagged frames from external devices. The 802.1D Spanning Tree Protocol (STP), Rapid Spanning Tree Protocol (RSTP), and Multiple Spanning Tree Protocol (MSTP) are used as the bridging protocols between Layer 2 switches. 8 Converged Enhanced Ethernet Administrator's Guide 53-1001346-01