HP StorageWorks 8/40 Brocade Converged Enhanced Ethernet Administrator's Guide - Page 73
MSTP overview
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
MSTP overview 5 10. Configure the bridge hello time value. For details, see "Specifying the bridge hello time (STP and RSTP)" on page 60. switch(conf-stp)#hello-time 5 11. Flush the MAC addresses from the VLAN FDB. For details, see "Flushing MAC addresses (RSTP and MSTP)" on page 63. switch(config)#spanning-tree tc-flush-standard 12. Enable PortFast on switch ports using the spanning-tree portfast command. For details, see "Enabling port fast (STP)" on page 67. Note that this step is optional. NOTE PortFast only needs to be enabled on ports that connect to workstations or PCs. Repeat these commands for every port connected to workstations or PCs. Do not enable PortFast on ports that connect to other switches. switch(config)#interface tengigabitethernet 0/10 switch(conf-if-te-0/10)#spanning-tree portfast switch(conf-if-te-0/10)#exit switch(config)#interface tengigabitethernet 0/11 switch(conf-if-te-0/11)#spanning-tree portfast switch(conf-if-te-0/11)#exit Repeat these commands for every port connected to workstations or PCs. 13. Set the following ports to forwarding mode: - All ports of the root switch - The root port - The designated port For details, see "Specifying the port priority" on page 67. 14. Enable the guard root feature with the spanning-tree guard root command. The guard root feature provides a way to enforce the root bridge placement in the network. For detailed information, refer to"Enabling the guard root" on page 65. Note that this step is optional. All other switch ports connect to other switches and bridges are automatically placed in blocking mode. This does not apply to ports connected to workstations or PCs; these ports remain in the forwarding state. 15. Enter the copy command to save the running-config file to the startup-config file. switch(conf-if-te-0/1)#exit switch(config)#end switch#copy running-config startup-config MSTP overview The IEEE 802.1s Multiple STP (MSTP) helps create multiple loop-free active topologies on a single physical topology. MSTP enables multiple VLANs to be mapped to the same spanning tree instance (forwarding path), which reduces the number of spanning tree instances needed to support a large number of VLANs. Each MSTP instance has a spanning tree topology independent of other Converged Enhanced Ethernet Administrator's Guide 53 53-1001346-01