HP StorageWorks 8/40 HP StorageWorks 8-Gb SAN Switch hardware reference manual - Page 39
Installing the rear mounting brackets HP 10000 series racks
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
3. Attach the rear mounting brackets to the rear rack uprights: • For HP 10000 series racks, assemble each of the two brackets with two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock-washers and two #10 adapter washers, as shown in Figure 11. • For an HP System/e Rack, install the two rear mounting brackets with two #10-32 x 1/2-inch Phillips pan-head screws and two #10 alignment washers, as shown in Figure 12. Figure 11 Installing the rear mounting brackets (HP 10000 series racks) Figure 12 Installing the rear mounting brackets (HP System/e Rack) NOTE: Your SAN Switch Rack Mount Kit contains both right rails and left rails. The rails are labelled Right and Left. 8-Gb SAN Switch hardware reference manual 39
3.
Attach the rear mounting brackets to the rear rack uprights:
•
For HP 10000 series racks, assemble each of the two brackets with two #10-32 x 1/2-inch
Phillips pan-head screws with captive star lock-washers and two #10 adapter washers, as
shown in
Figure 11
.
•
For an HP System/e Rack, install the two rear mounting brackets with two #10-32 x 1/2-inch
Phillips pan-head screws and two #10 alignment washers, as shown in
Figure 12
.
Figure 11 Installing the rear mounting brackets (HP 10000 series racks)
Figure 12 Installing the rear mounting brackets (HP System/e Rack)
NOTE:
Your SAN Switch Rack Mount Kit contains both right rails and left rails. The rails are labelled
Right
and
Left
.
8-Gb SAN Switch hardware reference manual
39