HP StorageWorks 8/8 Brocade Fabric OS Command Reference Guide v6.1.0 (53-10005 - Page 297
iclCfg, Synopsis, enable, disable, Description, Notes, Operands, Examples
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 297 highlights
iclCfg 2 iclCfg Enables or disables Inter-chassis links (ICL). Synopsis iclcfg --enable slot/icl_group iclcfg --disable slot/icl_group iclcfg --help Description Use this command to enable or disable an inter-chassis link (ICL) on a Brocade DCX. The command enables or disables the ICL by enabling or disabling the ports associated with the link. This command is supported only on the Brocade DCX backbone. Notes The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. This command must be executed on the active CP. Operands The following operands are required: slot Specifies the slot number of the ICL group to be enabled or disabled, followed by a slash (/). The slot on the DCX can be either 5 or 8. icl_group Specifies the ICL port group to be disabled or enabled. An ICL group represents a range of ports. Specify 0 to enable or disable ports 0-15. Specify 1 to enable or disable ports 16-31. --enable Enables the ICL for the specified port group. --disable Disables the ICL for the specified port group. --help Displays command usage. Examples To disable the ICL for ports 16-31: switch:user> iclcfg --disable 8/1 To enable the ICL for ports 16-31: switch:user> iclcfg --enable 8/1 Fabric OS Command Reference 271 53-1000599-02