HP StorageWorks 8/8 Brocade Fabric OS Command Reference Guide v6.1.0 (53-10005 - Page 649
supportFtp, hostip, username, password, remotedirectory, hours
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 649 highlights
supportFtp 2 supportFtp Sets, clears, or displays support FTP parameters, or a time interval to check the FTP server. Synopsis supportftp [-S] supportftp -s [-h hostip][-u username][-p password][-d remotedirectory] supportftp -t hours supportftp -R supportftp -e Description Use this command to set, clear, or display support FTP parameters, or a time interval to check the FTP server. This command displays IPv4 and IPv6 addresses. Note The execution of this command is subject to Admin Domain restrictions that may be in place.Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands This command has the following mutually exclusive operands: -S Displays the FTP parameters. -s Sets the FTP parameters. -s has the following optional operands: -h hostip Specifies the FTP host IP address. It must be an IP address. hostip should be less than 48 characters. -u username Specifies the FTP user name. username should be less than 48 characters. -p password Specifies the FTP user password. If the user name is anonymous, the password is not needed. password should be less than 48 characters. -d remotedirectory Specifies the remote directory for storing trace dump files. supportFtp cannot take a slash (/) as a directory name. remotedirectory should be less than 48 characters. -t hours Sets the time interval for checking the FTP server. The -t operand has the following required operand: hours checks the connectivity of FTP server at the indicated time interval (in hours). -R Removes all files from the switch; //clears parameters -e Enables auto file transfer. If no parameter is not specified, the supportFtp command defaults to supportFtp -S. Examples To set the FTP parameters: switch:admin> supportftp -s -h 1080::8:800:200C:417A -u njoe -p password -d support supportftp: ftp parameters changed. To display the FTP parameters: switch:admin> supportftp Fabric OS Command Reference 623 53-1000599-02