HP StorageWorks 8/8 Brocade Fabric OS Command Reference Guide v6.1.0 (53-10005 - Page 648
supportFfdc, Synopsis, disable, enable, Description, Operands, Examples, See Also
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 648 highlights
2 supportFfdc supportFfdc Modifies or displays the first-fault data capture (FFDC) daemon. Synopsis supportffdc [--disable | --enable | --show] Description Use this command to disable or enable the FFDC events, or to display the current configuration. If disabled, the daemon does not capture any data even when a message with FFDC attributes is logged. FFDC is enabled by default. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands This command has the following operands: --disable Disables the FFDC. --enable Enables the FFDC. --show Displays the FFDC configuration parameters. When executed without operands, the command prints the usage. Examples To display the FFDC configuration: switch:admin> supportffdc --show First Failure Data Capture (FFDC) is disabled. To enable the FFDC events: switch:admin> supportffdc --enable First Failure Data Capture (FFDC) is enabled. See Also none 622 Fabric OS Command Reference 53-1000599-02