HP StorageWorks 9030 HP StorageWorks 9000 Virtual Library System User guide (A - Page 86
Installing the Firmware, Installing the Deduplication Licenses, Configuring Deduplication Options
View all HP StorageWorks 9030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
entire backup job and to prevent too many backup jobs from piling up on the same cartridge, but small enough that you are not wasting overall cartridge space. • Additional nodes - For systems with long backup windows, you may want to include additional nodes to speed up the post-processing deduplication. A VLS system using deduplication can support up to six nodes nodes. • Additional capacity - Because you must store two full backups before the delta-differencing begins, you may want to include additional disk capacity at least the size of the sum of the backups. A VLS system using deduplication can support up to eight arrays with four 1U or 2U nodes. Installing the Firmware The deduplication feature requires an upgrade to the VLS firmware version 3.0 or higher. Download the VLS Firmware and Quick Restore CD Image appropriate for your VLS system from the HP website, and burn it to a DVD (or CD). Then follow the instructions for using the Quick Restore DVD. 1. Save your configuration settings. See Saving Configuration Settings (page 133). 2. Download the VLS Firmware and Quick Restore CD Image appropriate for your VLS system from the HP website. 3. Burn the image to CD to create your own Quick Restore DVD. 4. Follow the Recovering from Operating System Failure (page 230) procedure for re-installing the operating system, including the instructions specific to restoring primary nodes. NOTE: You must install the Quick Restore DVD on each node of the VLS. Installing the Deduplication Licenses The deduplication feature is a licensed option. The number of deduplication licenses must match or exceed the number of capacity licenses (based on LTU) on the VLS device. See Installing Additional Licenses (page 48) for installation instructions. After installing the required deduplication licenses, the VLS automatically reboots. When the system is back up, it first checks the standard capacity licenses and then the deduplication licenses. Once the deduplication licenses are verified, the deduplication feature is automatically enabled for all supported backup types. No further setup is required. When the next backup begins, the deduplication process begins mapping the content of that backup. After the second backup, the system delta-differences (compares) the two backups and the deduplication proceeds. You may choose to disable some backup types; see Configuring Deduplication Options (page 86) for details. Configuring Deduplication Options You can include or exclude specific backups or types of backup (e.g., server type) from the deduplication process and choose the deduplication algorithm used. NOTE: These options are not available until you have installed the appropriate number of deduplication licenses. 1. Select the System tab. 2. On the navigation tree, navigate to Chassis→Deduplication→Configuration . The Configuration screen displays. 3. For each data type, select the appropriate deduplication algorithm from the list. The defaults depend on the backup application and the file type; in each case, the algorithm most likely 86 Deduplication