HP StorageWorks MSA 2/8 HP StorageWorks MSA SAN Switch 2/8 Installation Guide - Page 30
Requirements, An IP address from your Network Administrator
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Configuring the MSA SAN Switch 2/8 Requirements The following items are required to set network addressing: ■ An IP address from your Network Administrator ■ An installed MSA SAN Switch ■ Serial cable (supplied with the switch) for connecting the switch to the workstation This cable must be a straight-through cable. ■ A local workstation (desktop or notebook computer) with a serial terminal connection ■ RS-232 serial communication software (for example, ProComm Plus or HyperTerminal) ■ Ethernet cable for connecting the switch to the workstation or to a network containing the workstation This cable can be a cross-over cable or a straight-through cable. ■ SFPs and fiber cables, as required, to connect the switch to the fabric 30 MSA SAN Switch 2/8 Installation Guide