HP StorageWorks MSA 2/8 HP StorageWorks MSA SAN Switch 2/8 Installation Guide - Page 47
Port Status LED Definitions, Table 6, Port Status LEDs
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Managing the MSA SAN Switch 2/8 Port Status LED Definitions Table 6: Port Status LEDs LED Color No light Steady green Slow-flashing green (on 1 second; off 1 second) Fast-flashing green (on 1/4 second; off 1/4 second) Flickering green Steady amber Slow-flashing amber (on 1 second; Off 1 second) Fast-flashing amber (on 1/4 second; off 1/4 second) Alternating green and amber Hardware Status No signal or light carrier (media or cable) detected. Port is online (connected to external device) but shows no traffic. Port is online, but segmented, indicating a loopback cable or incompatible switch. Port is in internal loopback (diagnostic). Port is online. Port is receiving signal carrier, but is not yet online. Port is disabled (result of diagnostics or portDisable command). Port is faulty. Port is bypassed. Recommended Action Check media and cable. No action required. Verify correct device is connected to the port. No action required. No action required No action required. Enable port (can use PortEnable command; refer to the HP StorageWorks Fabric OS Reference for more information). 1. Check port status LEDs, error log, and cable or loopback plug. 2. Clear the error log. Check configuration of the Fibre Channel loop. MSA SAN Switch 2/8 Installation Guide 47