HP StorageWorks MSA2312fc HP StorageWorks 2000 G2 Modular Smart Array Controll - Page 3

6. Turn the thumbscrews until the screws disengage from the module. 7. Rotate both latches downward to disconnect the module from the internal connector. Transporting CompactFlash nl (single-controller configurations only) CAUTION: CompactFlash must stay with the same enclosure. If the CompactFlash is used/installed in a different enclosure, data loss or corruption will occur. 1. If the controller has failed or does not start, make sure that transporting the cache is the appropriate action to take as specified in the user guide. 2. Carefully remove the CompactFlash from the controller, label it "Data," and set it aside. 8. Pull the module straight out of the enclosure. 3. Carefully remove the CompactFlash from the replacement controller, and set it aside. 4. Insert the CompactFlash that you removed from the failed controller and labeled "Data" into the replacement controller. Page 3