HP StorageWorks Modular Smart Array 1000 HP StorageWorks 1000/1500 Modular Sma - Page 19

Show commands The show command is used to view MSA configuration and status information. A few samples are provided in the following paragraphs. Basic command show [acl] [aculock] [cacheinfo] [connections] [disks] [eventlog] [globals] [other_controller] [perf] [preferred_path] [profile] [proxystats] [taskstats] [tech_support] [this_controller] [unit #] [unit_id #] [units] [version] Command options acl-displays information about the access control lists, including whether they are enabled or disabled, the connection name, wwpn, and LUNs they are permitted to access. aculock-displays the status of the ACU lock. cacheinfo-displays MSA controller cache information. connections-displays information about the HBA connections to the MSA, including the user-defined name, wwpn, and operating system profile. disks-displays information about the hard drives connected to the MSA, including: disk number, enclosure box and bay number, enclosure bus number, disk size, LUN in which the disk is used, and disks assigned as spares. eventlog-displays MSA event log. globals-displays global information about the MSA chassis, including the user-defined system name, rebuild/expand priority settings, read/write cache settings, and temperature readings. other_controller-displays information about the MSA controller, including: the user-defined controller ID, hardware build number, controller firmware version, SCSI ID, redundancy settings, cache settings, and battery information. perf-displays MSA performance analysis information. preferred_path-(dual-controller, active/active configurations only) displays the controller path for the LUNs. profile-displays information about the profiles assigned to the HBAs connected to the MSA. proxystats-(dual-controller, active/active configurations only) displays information about commands that have been passed from one controller to the other through the intercontroller link (ICL) during the past 30 minutes. taskstats-displays MSA task statistics information. tech_support-displays a summary of system information, executing the following commands in a batch: show disks, show units, show this_controller, show other_controller, show cacheinfo, show globals, show version, show profile, show acl, show connections, and show eventlog. this_controller-displays information about the MSA controller, including: the user-defined controller ID, hardware build number, controller firmware version, SCSI ID, redundancy settings, cache settings, and battery information. unit #-displays information about a specific LUN, including: the LUN ID, status, list of hard drives included in the LUN, list of hard drives assigned as spares to the LUN, RAID level, and LUN size. unit_id #-displays the user-defined name assigned to a LUN. units-displays information about all configured LUNs, including: the LUN ID, status, list of hard drives included in the LUN, list of hard drives assigned as spares to the LUN, RAID level, and LUN size. version-displays version information, including: hardware build, controller firmware, and fan module firmware. version -all-displays individual hard drive firmware versions, in addition to what the version command shows. HP StorageWorks 1000/1500 Modular Smart Array Command Line Interface user guide 19