HP StorageWorks Modular Smart Array 1000 Configuring the HP StorageWorks Modul - Page 28

Installation of Operating System, Operating System Install Procedure Notes:

Get HP StorageWorks Modular Smart Array 1000 PDF manuals and user guides View all HP StorageWorks Modular Smart Array 1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Configuring the MSA1000/MSA1500cs for External Boot with Windows 28 Installation of Operating System 1) On reboot insert OS CD and begin installation 2) As the operating system install begins a message will be displayed Setup is inspecting your computers hardware configuration.... followed by a blue installation screen. You must press F6 at this time to allow the operating system to install the additional driver required for the HBA. Operating System Install Procedure Notes: Windows 2000 and 2003 will display a message: Press F6 if you need to install a third party SCSI or RAID driver. 1. When setup prompts you to Specify an Additional Device because it can't find a driver for the hardware that you have, choose S=Specify Additional Device. 2. Insert the driver diskette or USB drive (that was specified in the Considerations section of this Technical Note) and press enter. Choose: the appropriate driver for your HBA. and press 3. You will be returned to the Specify Additional Device screen. Press 4. Setup will continue to load additional drivers. From this point the installation will resume as normal. NOTE: When prompted for the location to install the operating system ensure that you select the volume created on the MSA1000/MSA1500cs. Completing the Server Build Follow the on screen prompts during the OS install. When instructed, remove all media from floppy and CD ROM drives, and perform a reboot. Continue building the server for your specific environment.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
Configuring the MSA1000/MSA1500cs for External Boot with Windows
28
Installation of Operating System
1) On reboot insert OS CD and begin installation
2) As the operating system install begins a message will be displayed
Setup is inspecting your computers hardware configuration….
followed by a blue installation screen.
You must press F6 at this time to allow the operating system to install the additional
driver required for the HBA.
Operating System Install Procedure Notes:
Windows 2000
and
2003
will display a message:
Press F6 if you need to install a third party
SCSI or RAID driver
.
1. When setup prompts you to Specify an Additional Device because it can’t find a driver for
the hardware that you have, choose
S=Specify Additional Device.
2. Insert the driver diskette or USB drive (that was specified in the
Considerations
section of
this Technical Note) and press enter. Choose: the appropriate driver for your HBA.
and
press <enter>
3. You will be returned to the Specify Additional Device screen. Press
<enter>
4. Setup will continue to load additional drivers. From this point the installation will resume
as normal.
NOTE:
When prompted for the location to install the operating system ensure that you select the
volume created on the MSA1000/MSA1500cs.
Completing the Server Build
Follow the on screen prompts during the OS install.
When instructed, remove all media from
floppy and CD ROM drives, and perform a reboot.
Continue building the server for your specific
environment.