HP StorageWorks Modular Smart Array 1000 Configuring the HP StorageWorks Modul - Page 4
Setup for RBSU Servers, Setup for Servers without RBSU, Boot Controller Orde, Position
![]() |
View all HP StorageWorks Modular Smart Array 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Configuring the MSA1000/MSA1500cs for External Boot with Windows 4 Setup for RBSU Servers 1. Make sure you have the latest ROM BIOS installed on your server. If needed, there are several options available to upgrade the BIOS; you can download the Firmware Maintenance CD from www.hp.com, or you can download individual components for your specific server. 2. Set the boot order: a. While the system is booting, Press F9 to start the ROM Setup Utility. b. Choose Boot Controller Order. c. Select the primary HBA and move it to Controller Order 1. d. Exit the utility. Setup for Servers without RBSU If your server does not have RBSU, perform the following steps: 1. Download and install the latest system ROM from the website: http://www.hp.com. 2. Download SOFTPAQ SP18002 from ftp://ftp.compaq.com/pub/softpaq/sp18001-18500/. 3. Run the SOFTPAQ program to create an upgrade diskette. 4. Boot from the ProLiant Smart Start CD-ROM and run the program to clear the configuration. 5. Reboot from the new upgrade diskette. The ORD.EXE program should start automatically. 6. Set the Primary HBA to Position 1. 7. Reboot the server.
![](/manual_guide/products/hewlettpackard-storageworks-modular-smart-array-1000-configuring-hp-storageworks-modular-smart-array-1000-1500cs-external-boot-microsoft-windows-new-installations-technical-note-2006-164b65a/4.png)