HP StorageWorks SN6000 HP StorageWorks 8/20q Fibre Channel Switch event messag - Page 50
Domain Name System DNS server. Verify the host, A Common Information Model CIM edit session
View all HP StorageWorks SN6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Table 7 Informative event messages and descriptions (Continued) Event ID and message Description (I) (8400.002C) (Switch) (User login A user login session has ended because of session session_ID user account_name has inactivity. timed out) (I) (8400.0036) (Switch) (Hotreset not Conditions exist that will not allow a hotreset. Try permitted at this time, try again later) again later. (I) (8400.0037) (Switch) (VIEnable automatically set to False since MFSEnable has been set to True) Setting the set config port command parameter MFSEnable to True automatically sets the set config port command parameters VIEnable and LCFEnable to False. (I) (8400.0038) (Switch) (LCFEnable automatically set to False since MFSEnable has been set to True) Setting the set config port command parameter MFSEnable to True automatically sets the set config port command parameters VIEnable and LCFEnable to False. (I) (8400.0039) (Switch) (MFSEnable automatically set to False since VIEnable has been set to True) Setting the set config port command parameter VIEnable to True automatically sets the set config port command parameter MFSEnable to False. (I) (8400.003A) (Switch) (MFSEnable automatically set to False since LCFEnable has been set to True) (I) (8400.003E) (Switch) (Readjusting TempMonitoringWarning from value C to value C) (I) (8400.0040) (Switch) (Readjusting TempMonitoringFailure from value C to value C) (I) (8400.0048) (Switch) (A CIM edit session has been canceled) Setting the set config port command parameter LCFEnable to True automatically sets the set config port parameter MFSEnable to False. The temperature threshold at which the switch issues a warning alarm is being changed. The temperature threshold at which the switch issues a failure alarm is being changed. A Common Information Model (CIM) edit session has been cancelled. (I) (8400.008C) (CallHome configuration The Call Home service configuration was changed has changed) by the administrator. (I) (8400.0097) (DNS lookup for host_name failed) The specified host name was not found on the Domain Name System (DNS) server. Verify the host name and correct it if necessary. Otherwise, report the failed host name to your network administrator. (I) (8600.0007) (PortApp) (Port: port_number) (Cancelling Online Test) The online test was canceled. (I) (8600.001D) (PortID port_fcid PortWWN The device given by the port Fibre Channel address port_wwn logged into nameserver.) and port WWN has logged in to the name server. (I) (8600.001E) (PortID port_fcid PortWWN port_wwn logged out of nameserver) The device given by the port Fibre Channel address and port WWN has logged out of the name server. (I) (8600.001F) (SYNC_ACQ) The port identified in previous event messages has synchronized with a connected device. (I) (8600.0020) (SYNC_LOSS) The port identified in subsequent event messages has lost synchronization with a connected device. 50