HP Stream Notebook - 14-z040wm HP Stream Notebook PC - Maintenance and Service - Page 34

USB board

Get HP Stream Notebook - 14-z040wm PDF manuals and user guides View all HP Stream Notebook - 14-z040wm manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

USB board Component USB board (includes cable, double-sided adhesive, eSATA port, USB port, and SIM slot) Spare part number 784532-001 Before replacing the USB board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 19). Remove the USB board: 1. Release the ZIF connector (1) to which the USB board cable is attached, and then disconnect the USB board cable from the system board. 2. Detach the USB board cable (2) from the battery. (The USB board cable battery is attached to the battery with double-sided adhesive.) 3. Remove the two Phillips PM1.9×2.1 broad head screws (3) that secure the USB board to the base enclosure. 4. Remove the USB board (4) and cable. Reverse this procedure to install the USB board. 28 Chapter 4 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
USB board
Component
Spare part number
USB board (includes cable, double-sided adhesive, eSATA port, USB port, and SIM slot)
784532-001
Before replacing the USB board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
19
).
Remove the USB board:
1.
Release the ZIF connector
(1)
to which the USB board cable is attached, and then disconnect the USB
board cable from the system board.
2.
Detach the USB board cable
(2)
from the battery. (The USB board cable battery is attached to the
battery with double-sided adhesive.)
3.
Remove the two Phillips PM1.9×2.1 broad head screws
(3)
that secure the USB board to the
base enclosure.
4.
Remove the USB board
(4)
and cable.
Reverse this procedure to install the USB board.
28
Chapter 4
Removal and replacement procedures for Authorized Service Provider parts