HP Surestore 15 Slot with DLT7000 HP SureStore DLT Tape Library Models 4115w/4 - Page 86
Running an Internal Test
View all HP Surestore 15 Slot with DLT7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Operating the Library Running an Internal Test CAUTION NOTE Running an Internal Test 1 2 → ADMIN * → TEST * The library can run self-diagnostic tests. To run these tests, follow these steps: Some diagnostic tests can place tape cartridges in unexpected locations. These tests should be run only by authorized service personnel. 1. Verify that the drive status displays. If not, press CANCEL until it does. 2. Press NEXT until ADMIN * appears in the display window, then press ENTER. 3. Enter the three-part numerical password (see "Entering the Administration Menu Password" on page 3-9). 4. INFO * displays. Press NEXT or PREV until TEST * displays, then press ENTER. 5. Press NEXT until the name of the test to run displays, then press ENTER. 6. NUM LOOPS # displays, where the 1 is flashing. Press NEXT until the number of test loops you wish to run displays, then press ENTER. Press CANCEL at any time to abort a test. TEST CANCEL - WAIT displays while the current test loop completes. 3-32