HP Surestore 6164 QuickLoop User's Guide - Page 33

Telnet Commands, Synopsis, Availability, Description, Operands, Example, See Also

Get HP Surestore 6164 - Switch PDF manuals and user guides View all HP Surestore 6164 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Telnet Commands qlDisable Disables QuickLoop mode. Synopsis qlDisable Availability Administrator Description Use this command to disable QuickLoop on a switch. If QuickLoop is being run on dual-switches, this command disables the local switch and causes the partner switch to re-initialize to a single-switch QuickLoop, containing only the devices connected to the partner switch. Operands None Example The following entry disables QuickLoop: sw5:admin> qlDisable See Also qlEnable qlPortDisable qlShow qlEnable Enables QuickLoop mode. Synopsis qlEnable Availability Administrator Description Use this command to enable QuickLoop on a switch. All devices connected to QuickLoop ports are re-initialized to form a single loop. If a partner switch is configured, qlEnable causes re-initialization of the partner if it is in QuickLoop. The devices on the two switches are then combined to form a single loop (using a single AL_PA space). QuickLoop Telnet Commands 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
QuickLoop Telnet Commands
33
Telnet Commands
qlDisable
Disables QuickLoop mode.
Synopsis
qlDisable
Availability
Administrator
Description
Use this command to disable QuickLoop on a switch. If QuickLoop is
being run on dual-switches, this command disables the local switch and
causes the partner switch to re-initialize to a single-switch QuickLoop,
containing only the devices connected to the partner switch.
Operands
None
Example
The following entry disables QuickLoop:
sw5:admin> qlDisable
See Also
qlEnable
qlPortDisable
qlShow
qlEnable
Enables QuickLoop mode.
Synopsis
qlEnable
Availability
Administrator
Description
Use this command to enable QuickLoop on a switch. All devices connected
to QuickLoop ports are re-initialized to form a single loop.
If a partner switch is configured,
qlEnable
causes re-initialization of the
partner if it is in QuickLoop. The devices on the two switches are then
combined to form a single loop (using a single AL_PA space).