HP Surestore 6164 QuickLoop User's Guide - Page 36

qlPortEnable

Get HP Surestore 6164 - Switch PDF manuals and user guides View all HP Surestore 6164 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

partner that is running in QuickLoop, both switches re-initialize the QuickLoop to form a loop that excludes any devices connected to the specified port. If the qlPortDisable command is entered for a port, the qlEnable command has no effect on that port, because it has been removed from QuickLoop management. The port must be re-enabled using the qlPortEnable command. The specified port must be in QuickLoop for this command to have effect. Operands The following operand is required: port_number The port number to be enabled (0 to 7 or 0 to 15, depending on the number of ports on the switch) Example The following entry disables QuickLoop on port 4: sw5:admin> qlPortDisable 4 See Also qlDisable qlPortEnable qlShow qlPortEnable Enables a QuickLoop port. Synopsis qlPortEnable port_number Availability Administrator Description Use this command to enable a QuickLoop port. This includes any devices connected to this port in the QuickLoop, and causes the switch to re-initialize the QuickLoop. If the switch that the port belongs to has a partner, and the partner is running in QuickLoop mode, both switches re-initialize their quickloops to form a new loop that includes the devices connected to this port. 36 QuickLoop User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
36
QuickLoop User’s Guide
partner that is running in QuickLoop, both switches re-initialize the
QuickLoop to form a loop that excludes any devices connected to the
specified port.
If the
qlPortDisable
command is entered for a port, the
qlEnable
command has no effect on that port, because it has been removed from
QuickLoop management. The port must be re-enabled using the
qlPortEnable
command.
The specified port must be in QuickLoop for this command to have effect.
Operands
The following operand is required:
port_number
The port number to be enabled (0 to 7 or 0 to 15,
depending on the number of ports on the switch)
Example
The following entry disables QuickLoop on port 4:
sw5:admin> qlPortDisable 4
See Also
qlDisable
qlPortEnable
qlShow
qlPortEnable
Enables a QuickLoop port.
Synopsis
qlPortEnable port_number
Availability
Administrator
Description
Use this command to enable a QuickLoop port. This includes any devices
connected to this port in the QuickLoop, and causes the switch to
re-initialize the QuickLoop.
If the switch that the port belongs to has a partner, and the partner is
running in QuickLoop mode, both switches re-initialize their quickloops to
form a new loop that includes the devices connected to this port.