HP T5520 Administrator's Guide: Windows CE 5.0 - HP Compaq Thin Client t5520 - - Page 44

Jetcet Print 4.0

Get HP T5520 - Compaq Thin Client PDF manuals and user guides View all HP T5520 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

JETCET PRINT 4.0 The JETCET PRINT Professional dialog box allows you to set up the terminal for local printing from Txtpad and Internet Explorer. NOTE: Windows CE is best suited for printing small documents. NOTE: Printer port designations are: LPT1 = parallel, LPT2 = USB. To set up a printer: 1. In the Default Printer box, select a default printer. 2. In the Manufacturer Model box, select the printer model. 3. If printing using a serial connection, in the Serial Handshaking box select either Hardware or Software for serial handshaking between the terminal and printer. 4. Set the appropriate print spooler options. You must select Use Spooler for other options to become available. 5. Click the Properties button to configure printer settings. Define printer settings as appropriate. 6. If you want to configure Internet Printing (IPP) to allow you to print to network printers: a. Click the Internet Printing tab. b. Click Add Port. c. Type the IP address of the network printer to which you want to print. d. Select the port from which to send print jobs from the Virtual Port list. To avoid port conflicts, HP recommends selecting COM2 as the virtual port. e. Click OK. f. Click OK to exit the JETCET dialog box. NOTE: For more information, refer to the JETCET user guide at http://www.westtek.com/ support/pocketpc/jetcet.html. NOTE: Internet Explorer uses LPT1 as its default printer port. If you want to print using a different port, in Internet Explorer, select File > Page Setup and select the port to which to print. 36 Chapter 4 Control Panel ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
JETCET PRINT 4.0
The JETCET PRINT Professional dialog box allows you to set up the terminal for local printing from Txtpad
and Internet Explorer.
NOTE:
Windows CE is best suited for printing small documents.
NOTE:
Printer port designations are: LPT1 = parallel, LPT2 = USB.
To set up a printer:
1
.
In the
Default Printer
box, select a default printer.
2
.
In the
Manufacturer Model
box, select the printer model.
3
.
If printing using a serial connection, in the
Serial Handshaking
box select either
Hardware
or
Software
for serial handshaking between the terminal and printer.
4
.
Set the appropriate print spooler options. You must select
Use Spooler
for other options to become
available.
5
.
Click the
Properties
button to configure printer settings. Define printer settings as appropriate.
6
.
If you want to configure Internet Printing (IPP) to allow you to print to network printers:
a
.
Click the
Internet Printing
tab.
b
.
Click
Add Port
.
c
.
Type the IP address of the network printer to which you want to print.
d
.
Select the port from which to send print jobs from the
Virtual Port
list. To avoid port conflicts,
HP recommends selecting COM2 as the virtual port.
e
.
Click
OK
.
f
.
Click
OK
to exit the JETCET dialog box.
NOTE:
For more information, refer to the JETCET user guide at
support/pocketpc/jetcet.html
.
NOTE:
Internet Explorer uses LPT1 as its default printer port. If you want to print using a different
port, in Internet Explorer, select
File > Page Setup
and select the port to which to print.
36
Chapter
4
Control Panel
ENWW