HP Vectra 486N and NI D27xxA essai - Page 10

Advanced Configuration, Options Menu

Page 10 highlights

Configuring the SCSI Bus Advanced Configuration It is recommended that these settings are not changed. Options Menu Advanced Configuration Options Plug and Play Scam Support Disabled Extended BIOS Translation for DOS Drives > 1 GByte Enabled Reset SCSI Bus at IC Initialization Enabled Options Listed Below Have NO EFFECT if the BIOS is Disabled Host Adapter BIOS (Configuration Utility Reserves BIOS Space).. Enabled Support Removable Disks Under BIOS as Fixed Disks Boot Only Display F6 Message During BIOS Initialization Enabled BIOS Support for Bootable CD-ROM Enabled BIOS Support for Int13 Extensions Enabled Use the and keys to move between options. Press to display a menu with a selection of values. • Plug and Play Scam Support When enabled, this option automatically configures Plug and Play compatible SCSI devices. For SCSI devices that do not support Plug and Play, set this option to Disabled. By default, it is enabled. • Extended BIOS Translation for DOS Drives >1 GByte This option is no longer used (and must always be "Enabled"). • Reset SCSI Bus at IC Initialization When the SCSI controller receives an IC Reset command from the central processor, it can reset either itself and the SCSI bus, or just itself. By default, it will reset both itself and the SCSI bus. • Host Adapter BIOS This option enables or disables the SCSI Adapter BIOS. Several options in SCSISelect utility are only valid if the SCSI adapter BIOS is enabled. The SCSI adapter BIOS must be enabled if the computer boots from a SCSI hard disk drive. This option is enabled by default. • Support Removable Disks Under BIOS as Fixed Disks When Boot Only is selected, only the removable media drive designated as the boot device is treated as a hard disk drive. If All Disks is selected, all removable-media drives supported by the BIOS are treated as hard disk drives. No removable-media drives are treated as hard disk drives when Disabled is selected. In this case, removable-media drives must be controlled through operating system drivers. 6 English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

Configuring the SCSI Bus
6
English
Advanced Configuration
Options Menu
It is recommended that these settings are not changed.
Use the
and
keys to move between options. Press
to
display a menu with a selection of values.
Plug and Play Scam Support
When enabled, this option automatically configures Plug and Play
compatible SCSI devices. For SCSI devices that do not support Plug
and Play, set this option to
Disabled
. By default, it is enabled.
Extended BIOS Translation for DOS Drives >1 GByte
This option is no longer used (and must always be “Enabled”).
Reset SCSI Bus at IC Initialization
When the SCSI controller receives an IC Reset command from the
central processor, it can reset either itself and the SCSI bus, or just
itself. By default, it will reset both itself and the SCSI bus.
Host Adapter BIOS
This option enables or disables the SCSI Adapter BIOS. Several
options in
SCSISelect
utility are only valid if the SCSI adapter BIOS
is enabled. The SCSI adapter BIOS must be enabled if the computer
boots from a SCSI hard disk drive. This option is enabled by default.
Support Removable Disks Under BIOS as Fixed Disks
When
Boot Only
is selected, only the removable media drive
designated as the boot device is treated as a hard disk drive.
If
All Disks
is selected, all removable-media drives supported by
the BIOS are treated as hard disk drives. No removable-media drives
are treated as hard disk drives when
Disabled
is selected. In this
case, removable-media drives must be controlled through operating
system drivers.
Advanced Configuration Options
Plug and Play Scam Support
....................................
Disabled
Extended BIOS Translation for DOS Drives > 1 GByte
............
Enabled
Reset SCSI Bus at IC Initialization
............................
Enabled
Options Listed Below Have NO EFFECT if the BIOS is Disabled
Host Adapter BIOS (Configuration Utility Reserves BIOS Space).. Enabled
Support Removable Disks Under BIOS as Fixed Disks
..............
Boot Only
Display F6 Message During BIOS Initialization
..................
Enabled
BIOS Support for Bootable CD-ROM
................................
Enabled
BIOS Support for Int13 Extensions
..............................
Enabled