HP Vectra VEi7 HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 12
Microsoft Windows 95, SR2.5, Connecting to a Novell, Netware 4.11 Server, Requirements, Device
View all HP Vectra VEi7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
4 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter Microsoft Windows 95 SR2.5 4 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter Microsoft Windows 95 SR2.5 Connecting to a Novell Netware 4.11 Server Requirements • HP Vectra with Windows 95 SR2.5. • Intel EtherExpress PRO 10+ ISA Ethernet card and drivers disk version 3.50. • Driver File: PROW95.VXD, version 1.43a • Microsoft Windows 95 SR2.5 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell Client for Windows 95 v2.5 installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 5 210 Vectra VEi7 03 210 Vectra VEi8 07 210 Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 10+ ISA adapter card into an ISA slot. 2 Connect network cable media to the PRO 10+ card. 3 Power on the machine and start Windows 95SR2.5 in MS-DOS mode. 4 Insert the Intel drivers disk, "EtherExpress Ethernet Drivers" and execute "SOFTSET2.EXE". 5 Select "CONFIGURE NIC" and verify the resource settings listed above under the heading "Device Configuration". 6 If changes are required, save those changes and exit. 7 Remove the Intel Software driver diskette and restart the system. 8 When Windows 95 restarts, a message will appear to indicate that a new hardware has been found.