HP Vectra VEi7 HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 31
Click on the Install Microsoft Windows Network: option, and click OK.
View all HP Vectra VEi7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
12 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter Connecting to a Microsoft Windows NT4.0 Server 10 Click on the "Install Microsoft Windows Network:" option, and click "OK". 11 Click on the "Drivers" button from the "Network Setup" dialog box, and click on "Add Adapter". 12 Click "OK" to accept the default choice of "Unlisted or Updated Network Adapter". 13 Type the path "A:\WFW" in the "Install Driver" dialog box, and then insert the Intel driver disk into the floppy drive, and click "OK". 14 Select "Intel EtherExpress[TM] PRO/10 LAN Adapter" in the "Unlisted or Updated Network Adapter" dialog box, and click "OK". 15 Confirm the Interrupt Settings and click "OK". 16 Confirm the Base I/O Port Settings and click "OK". 17 Confirm the Transceiver Type settings and click "OK". 18 Confirm the Link Speed settings and click "OK". 19 Confirm the Power Management settings and click "OK". 20 Confirm the AllFramesCRT settings and click "OK". 21 Confirm the DynamicCRTMax settings and click "OK". 22 Confirm the DynamicCRTIncrement settings and click "OK". 23 Confirm the DynamicCRTInterval settings and click "OK". 24 Make sure that the "Intel EtherExpress[TM] PRO/10 LAN Adapter [NDIS2/NDIS3]" is selected in "Network Drivers". 25 Accept the applicable network protocols, and then click on "CLOSE". 26 At the "Network Setup" dialog box, click on "OK". 27 Specify your User Name, Workgroup, and Computer Name in "Microsoft Windows Network Names" dialog box, and click on "OK". (The Drivers will now start to copy). 28 To complete the installation, remove the Intel diskette from the floppy drive and click on "Restart Computer" button in the "Windows Setup" dialog box.