HP Vectra VL800 hp vectra vl800, technical reference manual - desktop and mini - Page 48
Accessory Board Slots, AGP Slot
View all HP Vectra VL800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
3 System Board Accessory Board Slots Accessory Board Slots The following block diagram shows the position of the accessory board slots on the system board. One 1.5V AGP slot. Five 32-bit 33 MHz PCI slots PCI Slot 1 PCI Slot 2 PCI Slot 3 PCI Slot 4 PCI Slot 5 AGP Slot Minitower models of the HP Vectra VL800 are equipped with a single AGP (Accelerated Graphics Port) graphics slot. The 1.5V AGP slot provides the ultimate graphics performance for highend graphics cards, combining AGP 4X bandwidth (with data transfer rates up to 1056 MB/s). NOTE AGP 3.3V graphics cards cannot be used. The 1.5V AGP slot is backwards compatible with both AGP 1x and 2x modes (using 1.5 V signalling), and AGP 4x mode (where 1.5 V signalling is required). The AGP interface and bus are explained on page 54. 48